Development of PBO Fibre Wound Thin Wall High Pressure VesselWith Aluminum Liner Used in Space Propulsion System
CSTR:
Author:
  • Article
  • | |
  • Metrics
  • |
  • Reference [14]
  • |
  • Related [20]
  • | | |
  • Comments
    Abstract:

    Based on the development of composite vessel used in space propulsion system, the applied research
    of PBO filament was developed. By the mechanical property tests of PBO/ D-3 and PBO/ D-8, the optimum composite
    system was obtained. Furthermore, the design, process and test of PBO filament wound thin wall high pressure
    vessel with aluminum liner were also studied. The results showed that, the optimum composite was PBO HM(high
    modulus) / D-8. The tensile strength and NOL ring interfacial shear strength can reach 1397 MPa and 20. 2 MPa respectively.
    The maximum vessel performance factor with PBO HM/ D-8 is 64. 5 km

    Reference
    [1] 张天平, 刘志栋, 杨福全,等. 一种卫星推进系统复
    合材料氦气瓶设计及验证[J]. 上海航天, 2006(3): 41-48
    [2] 张天平, 刘志栋, 王小永,等. 钛内衬碳纤维缠绕氦
    气瓶疲劳寿命和可靠度验证[J]. 中国空间科学技术, 2007,
    2(1): 41-46
    [3] 谢雄军. 21 世纪超级纤维-PBO[J]. 中国个体防护
    设备, 2002(3): 21-22
    [4] 侯仲军, 张永胜, 胡伟. PBO 纤维增强树脂基复合
    材料SRM 壳体制备技术研究[C] / / 中国航天第十三专业信
    息网2011 年度学术交流会论文集, 2011:1-9
    [5] 宋焕成. 聚合物基复合材料[M]. 北京: 国防工业
    出版社, 1981:293
    [6] 王百亚, 杨件奎, 方东红. PBO 纤维及其复合材料
    工艺性能研究[J]. 宇航材料工艺, 2004,34 (5): 15-20
    Cited by
    Comments
    Comments
    分享到微博
    Submit
Get Citation
Share
Article Metrics
  • Abstract:1155
  • PDF: 2285
  • HTML: 179
  • Cited by: 0
History
  • Online: November 28,2016
Article QR Code