Experimental on Compressive Behavior of X鄄Cor Sandwich
Author:
  • Article
  • | |
  • Metrics
  • |
  • Reference [36]
  • |
  • Related [20]
  • |
  • Cited by [0]
  • | |
  • Comments
    Abstract:

    Comparison tests of compressive properties were carried out on different z鄄pin angle,face skin thick鄄
    ness,with and without foam,which could be acquired the failure modes of X鄄Cor sandwich and the effect of different
    design parameters on compressive properties. Experimental results show that the combination of z鄄pins and foam core
    lead to a synergistic strengthening. Increasing restriction of z鄄pin爷s end and decreasing the angle between z鄄pin and
    face sheet can enhace the compressive properties. But the compressive properties of z鄄pin angle with 0毅are more to
    sensitive to angle deviation error,and it directly affects behavior of perfect mechanicals properties.

    Reference
    [1] 窦润龙,胡培. 复合材料泡沫夹层结构在民机中的应
    用[J]. 民用飞机设计与研究,2004(3):42-45
    [2] Majumdar P,Srinivasagupta D,Mahfuz H,et al. Effect of
    processing conditions and material properties on the debond frac鄄
    ture toughness of foam鄄core sandwich composites:experimental op鄄
    timization[J]. Composites Part A,2003,34(11):1097-1104
    [3] Zabihpoor M,Adibnazari S. Mechanisms of fatigue dam鄄
    age in foam core sandwich composites with unsymmetrical carbon/
    glass face sheets[J]. Journal of Reinforced Plastics and Compos鄄
    ites,2007,26(17):1831-1842
    [4] Carstensen T C,Kunkel E,Magee C. X鄄CorTM advanced
    sandwich core material[C] 椅Falcone A,International SAMPE
    Technical Conference Series,CA:Society of Advancement Material
    and Process Engineering,2001:452-466
    [5] Carti佴D D,Fleck N A. The effect of pin reinforcement
    upon the through鄄thickness compressive strength of foam鄄cored
    sandwich panels[J]. Composites Science and Technology,2003,
    63:2401-2409
    [6] Andrea I Marasco,Carti佴D D,Partridge I. K,et al. Me鄄
    chanical properties balance in novel z鄄pinned sandwich panels:
    out鄄of鄄plane properties[J]. Composites:Part A,2006,37(2):295
    -302
    [7] Andrea I Marasco. Analysis and evaluation of mechani鄄
    cal performance of reinforced sandwich structures:X鄄CorTM and K鄄
    CorTM[D]. Cranfield University,2005
    [8] 田旭,肖军,李勇. X鄄Cor 夹层结构试制与性能研究
    [J]. 飞机设计,2004(1):22-25
    [9] 李廉锟. 结构力学[M]. 北京:高等教育出版社,
    1996:1-20
    [10] 刘鸿文. 材料力学[M]. 北京:高等教育出社,2007:
    290-318
    [11] Liu T,Deng Z C,Lu T J. Design optimization of truss鄄
    cored sandwicheswith homogenization [J]. International Journal of
    Solids and Structures,2006,43(25):7891-7918
    [12] 杜龙. X鄄Cor 夹层复合材料力学性能研究[D]. 西
    安:西北工业大学,2007
    Comments
    Comments
    分享到微博
    Submit
Get Citation
Share
Article Metrics
  • Abstract:1228
  • PDF: 1841
  • HTML: 243
  • Cited by: 0
History
  • Online: November 28,2016
Article QR Code