Comparative on Influence of Cutting Parameters on Surface Roughness of Ti-6Al-4V Forging and Powder Metallurgy Workpieces
CSTR:
Author:
Clc Number:

TG506.9

  • Article
  • | |
  • Metrics
  • |
  • Reference [7]
  • |
  • Related [20]
  • | | |
  • Comments
    Abstract:

    In this paper, surface morphologies of Ti-6Al-4V forging and powder metallurgy workpieces were characterized, surface roughness mathematical models of the two machined workpieces were developed using orthogonal regression test,and the significances of the mathematical models were verified, the surface roughness mathematical models could predict the surface roughness changing trends. The experimental results showed that feed scratch, chip fragment and surface tearing defects appeared in the machined Ti-6Al-4V forging surface, while micro-void defect was formed in the machined powder metallurgy material surface apart from the feed scratch, chip fragment and surface tearing defects.The influence of feed rate on the surface roughness of both workpieces is greatest, and the existence of internal micro-void of Ti-6Al-4V powder metallurgy material led influence of cutting speed greater.

    Reference
    [1] ROBERT-PERRON E,BLARIS C,THOMAS Y,et al.An integrated approach to the characterization of powder metallurgy components performance during green machining[J].Materials Science and Engineering,2005,402(1/2):324-334.
    [2] XU L,GUO R P,BAI C G,et al.Effect of hot isostatic pressing conditions and cooling rate on microstructure and properties of Ti-6Al-4V alloy from atomized powder[J].Journal of Materials Science & Technology,2014,30(12):1289-1295.
    [3] SUN J,GUO YB.A comprehensive experimental study on surface integrity by end milling Ti-6Al-4V[J].Journal of Materials Processing Technology,2009,209(8):4036-4042.
    [4] RAMESH S,KARUNAMOORTHY L,PALANIKUMAR K.Measurement and analysis of surface roughness in turning of aerospace titanium alloy (gr5)[J].Measurement,2012,45(5):1266-1276.
    [5] GINTING A,NOUARI M.Surface integrity of dry machined titanium alloy[J].International Journal of Machine Tools & Manufacture,2009,49(3/4):325-332.
    [6] DABNUM M A,HASHMI M S,EI-BARADIE M A.Surface roughness prediction model by design of experiments for turning machinable glass-ceramic(Macor)[J].Journal of Materials Processing Technology,2005,164-165(15):1289-1293.
    [7] DA SILVA R B,VIEIRA.J M,CARDOSO R N,et al.Tool wear analysis in milling of medium carbon steel with coated cemented carbide inserts using different machining lubrication/cooling systems[J].Wear,2011,271(9/10):2459-2465.
    Cited by
    Comments
    Comments
    分享到微博
    Submit
Get Citation
Share
Article Metrics
  • Abstract:1404
  • PDF: 2848
  • HTML: 1569
  • Cited by: 0
History
  • Received:March 02,2017
  • Revised:June 23,2017
  • Online: December 12,2017
Article QR Code