HCFC-141b 型聚氨酯泡沫塑料耐环境性能

首页 > 过刊浏览>2015年第45卷第5期 >

HCFC-141b 型聚氨酯泡沫塑料耐环境性能
DOI:
                        
                    
CSTR:
                        [cstr]
                    
作者:
                        
                        
                    
作者单位:航天材料及工艺研究所
作者简介:
通讯作者:
中图分类号:TB3
基金项目:

Environmental Resistance of HCFC-141b Blowing Polyurethane Plastic Foam

Author:

Affiliation:

Fund Project:

摘要

图/表

访问统计

参考文献

相似文献

引证文献

资源附件

文章评论

摘要:

对比分析经历模拟特定环境的环境交变试验、盐雾试验、加速老化试验和太阳辐射试验前后泡沫

塑料的压缩强度、闭孔率、线胀系数和热导率等性能。结果表明,HCFC-141b 型聚氨酯泡沫塑料经历环境老化

后,压缩强度和热导率增加,线胀系数减小,闭孔率略有增加,热导率增加。太阳辐照试验对泡沫性能影响最

大,试样SD-4 压缩强度提高32%,闭孔率先增加后减少,线胀系数降低19%,热导率升高30%。

Abstract:

In this paper, wet鄄hot cycling test, salt鄄fog test, accelerated aging test and solar radiation test were

designed to simulate three special environments to test the performance change of HCFC-141b blowing polyurethane

plastic foam. Compressive strength, closed cell proportion, liner expansion coefficient and thermal conductivity were

tested before and after environment tests. The results indicate that after the three special environment tests HCFC-

141b blowing polyurethane plastic foam have higher compressive strength and thermal conductivity, smaller liner ex鄄

pansion coefficient and equivalent closed cell proportion. Solar radiation test on properties of foam effect maximum.

Compressive strength of sample SD-4 increased by 32%, and obturator first increased and then decreased, linear ex鄄

pansion coefficient decreased by 19%, the thermal conductivity increased 30%.

参考文献

相似文献

引证文献

引用本文

尤洁. HCFC-141b 型聚氨酯泡沫塑料耐环境性能[J].宇航材料工艺,2015,45(5).

复制

文章指标

点击次数:
下载次数:
HTML阅读次数:
引用次数:

历史

收稿日期:
最后修改日期:
录用日期:
在线发布日期: 2016-11-28
出版日期:

期刊介绍

编委会

投稿须知

引用本文

分享

文章指标

历史

文章二维码