热力学计算在新型热强耐蚀钢设计中的应用
作者单位:

北京卫星制造厂

中图分类号:

TG14


Application of Thermodynamics Calculation to Design ofA New Type of Steel With Heat Strength
  • 摘要
  • | |
  • 访问统计
  • |
  • 参考文献 [1]
  • |
  • 相似文献 [9]
  • | | |
  • 文章评论
    摘要:

    运用Thermo-Calc 计算软件分析碳化物对热作模具钢性能的影响,对新型热强耐蚀钢的合金成分
    进行了初步设计,并对该成分合金钢的组织性能进行了试验表征。结果表明,该钢种的基体组织为回火马氏
    体,其上有碳化物均匀,弥散分布;该钢种室温抗拉强度高达2 067 MPa,在620℃回火2 h 时硬度为50HRC 左
    右,在NaCl 腐蚀环境中耐蚀。

    参考文献
    [1] 谢豪杰,吴晓春. 热作模具钢的硬韧性因子[J]. 钢
    铁研究学报,2008,20(1):37-39
    [2] Janson. Thermodynamics and heat treatment[J]. Materials
    Science Forum. ,1994: 163-165
    [3] Inoue T. Influence of cementite distribution on machinability
    and tool[J]. Life of High Carbon Cr-Bearing Steel, 1998,
    84(5): 67-72
    [4] Asa Gustafson, Mats Hattestrand. Coarsening of precipitates
    in an advanced creep resistant 9% chromium steel-quantitative
    microscopy and simulations [ J]. Mat. Sct. & Eng. A,
    2002, 333: 279-286
    [5] Anders Bjarbo, Mats Hattestrand. Complex carbide
    growth, dissolution, and coarsening in a modified 12% chromium
    steel-an experimental and theoretical study[J]. Meta. and Mat.
    Tran. A, 2001, 32A:19-25
    [6] Li Jingbo. Computer simulation of phase transformation
    steels[J]. Materials and Design,2001,22: 39-43
    [7] 苗伟. 新型Fe-Cr-Mo-V-Nb 系热强耐蚀钢的成分
    设计与组织控制[D]. 哈尔滨工业大学, 2009:1-20
    [8] 何燕霖. 高性能预硬型塑料模具钢的计算机合金设
    计[D]. 上海大学,2004:4-6
    [9] 胡心彬,李麟,吴晓春. Thermo-Calc 在热作模具钢合
    金成分设计中的应用[J]. 热处理,2004,19(3):28-29
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文

苗 伟.热力学计算在新型热强耐蚀钢设计中的应用[J].宇航材料工艺,2015,45(1).

复制
分享
文章指标
  • 点击次数:1148
  • 下载次数: 2481
  • HTML阅读次数: 196
  • 引用次数: 0
历史
  • 在线发布日期: 2016-11-28
文章二维码