碳纳米管在环氧树脂中的分散性

首页 > 过刊浏览>2015年第45卷第2期 >

碳纳米管在环氧树脂中的分散性
DOI:
                        
                    
CSTR:
                        [cstr]
                    
作者:
                        
                        
                    
作者单位:航天材料及工艺研究所
作者简介:
通讯作者:
中图分类号:TB3
基金项目:

Dispersion of Carbon Nanotubes in Epoxy Resin

Author:

Affiliation:

Fund Project:

摘要

图/表

访问统计

参考文献

相似文献

引证文献

资源附件

文章评论

摘要:

通过调整工艺条件,制得不同分散性的碳管改性环氧树脂,分别采用静置观察法、黏度法、细度法

对分散性进行宏观表征。结果表明:碳管的分散性越好,环氧树脂的黏度越大、细度越低、保存时间越长;三种

方法均可以表征碳纳米管的分散均匀性;黏度法和细度法可以实现碳管分散性的快速评价,但均需找出具体的

评价标准。通过建立刮板细度与碳管分散性的对应关系,可以快速表征碳管的分散性,简便易行。

Abstract:

The dispersion of carbon nanotubes in epoxy resin fabricated in different technological conditions was

macroscopical characterized by stewing oberservation, viscosity and fineness respectively. The results reveal that as

the dispersion of carbon nanotubes is good, the viscosity of epoxy is big, the fineness is low, and the conserving time

is long. There are three means could all characterize the dispersion uniformity of carbon nanotubes, viscosity and fine鄄

ness could characterize the dispersion of carbon nanotubes quickly, but the specific evaluation criterion should be

found before. In this paper, the dispersions of carbon nanotubes were characterized quickly by establishing the corre鄄

sponding relation of scraper fineness and the dispersion. This method is quick, direct, accurate and easily operated,

compared to conventional micro-characterization technique.

参考文献

相似文献

引证文献

引用本文

邓火英.碳纳米管在环氧树脂中的分散性[J].宇航材料工艺,2015,45(2).

复制

文章指标

点击次数:
下载次数:
HTML阅读次数:
引用次数:

历史

收稿日期:
最后修改日期:
录用日期:
在线发布日期: 2016-11-28
出版日期:

期刊介绍

编委会

投稿须知

引用本文

分享

文章指标

历史

文章二维码