湿热环境对T700/5429 弯曲和面内压缩强度的影响
DOI:
CSTR:
作者:
作者单位:

南昌航空大学材料科学与工程学院

作者简介:

通讯作者:

中图分类号:

基金项目:


Effect of Hydrothermal Environment on Flexural and In鄄PlaneCompressive Strength of T700/5429
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    用热压罐法制备了单向碳纤维增强双马来酰亚胺树脂基(T700/5429) 复合材料层压板。在45、
    85益水浴的湿热环境下,对层压板进行了90 d 的浸泡,测试了浸泡前后的红外吸收光谱、吸湿率、弯曲和面内
    压缩强度。结果表明:浸泡90 d 后树脂基体未出现新的吸收峰;其吸湿率变化是扩散行为并可用菲克扩散定
    律描述;其弯曲和面内压缩强度随浸泡时间的变化是非线性的,即分形的,其中弯曲强度变化的分形维数45益
    时为1. 10、85益时为1. 07,面内压缩强度变化的分形维数45益时为1. 04、85益时为1. 05,说明复合材料弯曲强
    度和面内压缩强度随浸泡时间的变化具有一定的复杂性。

    Abstract:

    The hydrothermal properties of unidirectional reinforcement composite laminates T700/5429 are pres鄄
    ented in this paper. T700/5429 laminate are made by autoclave, the specimens were soaked at temperature of 45益
    and 85益in water bath for a period of 90 days. FT-IR, moisture absorption rate, the flexural and in鄄plane compres鄄
    sive strengths were measured and analyzed before and after immersed. The results showed that the new absorption
    peaks of resin matrix did not appear for their FT-IR, the moisture absorption of composite belongs to diffusion behav鄄
    ior and could be described by Fick爷s Law. The relations of the flexural and in鄄plane compressive strength of the com鄄
    posites with immersion time is not linear, that is fractal. The fractal dimension of flexural strength is 1郾10 (45益),
    1. 07(85益), and the fractal dimension of in鄄plane compressive strength is 1. 04(45益), 1. 05(85益). It is showed
    that the changes of flexural and in鄄plane compressive strength of composite between immersion time have some degree
    of complexity.

    参考文献
    相似文献
    引证文献
引用本文

孟江燕.湿热环境对T700/5429 弯曲和面内压缩强度的影响[J].宇航材料工艺,2012,42(5).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
文章二维码