纳米石墨薄片的制备、表征与应用
DOI:
CSTR:
作者:
作者单位:

中国工程物理研究院总体工程研究所,绵阳 621900

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation and Characterization of Nanographite Sheets
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了获得适宜于同聚合物进行纳米复合的纳米石墨薄片( NGS),采用微波膨化制备膨胀石墨
    (EG),利用超声剥离与表面修饰获得NGS,并借助SEM、XRD、FTIR 等分析其微观结构。结果表明:EG 由许多
    厚100-300 nm 的石墨薄片连接而成并形成网络结构,孔隙尺寸约几十纳米到几十微米;通过对EG 的超声剥
    离可破坏其原有网络结构并将石墨晶片进一步剥离为大量30-60 nm 厚的石墨薄片;石墨微波膨化与超声剥
    离过程中微观形貌的变化及其表面活性基团的引入,有利于进一步借助插层法实现聚合物与石墨的纳米复合。

    Abstract:

    The expanded graphite was prepared through microwave expanding method and the nanographite
    sheets were prepared through ultrasonic treatment and decoration technology. The microstructure of expanded graphite
    and nanographite sheets were characterized by means of SEM, XRD and FTIR. Meanwhile, the application of
    nanographite sheets in EPDM/ Graphite nanocomposites were introduced. The results showed that EG aremade from a
    lot of graphite sheets with 100 to 300 nm thickness and formed a kind of net structure. By means of ultrasonic treat
    ment, graphite is exfoliated and became many nanographite sheets with 30 to 60 nm thickness, meanwhile, the active
    groups are led into the surface of nanographite sheets. The application effect of nanographite sheets in EPDM/ Graphite
    nanocomposites are good.

    参考文献
    相似文献
    引证文献
引用本文

黄 琨 衣志勇 郭 静 黄渝鸿 范敬辉.纳米石墨薄片的制备、表征与应用[J].宇航材料工艺,2010,40(5).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
文章二维码