5A05铝合金黑色氧化膜的结构及耐蚀性能
DOI:
CSTR:
作者:
作者单位:

河南科技学院化学化工学院

作者简介:

通讯作者:

中图分类号:

基金项目:


Microstructures and Anticorrosion Property of Black Oxidation Film on 5A05 Aluminium Alloy
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    用两步化学氧化法在铝合金表面获得了黑色氧化膜。利用全浸渍腐蚀试验及电化学极化曲线评价了膜的耐蚀性能,利用扫描电子显微镜观察膜的表面形貌,采用能量散射谱(EDS)测定膜的成分。结果表明:铝合金的黑色氧化膜具有网块状结构,膜层主要由O、Al、Mn、Co、Cr五种元素所组成,未经封闭的铝合金氧化膜的耐蚀性能很差,而经重铬酸钾封闭后,耐蚀性大为提高。

    Abstract:

    Black oxidation film was obtained on Aluminium Alloy by two-step oxidation.The anticorrosion properties of the film were evaluated by neutral salt spray tests and electrochemical polarization curve.The morphology of the film was studied by scanning electron microscope.The composition of oxidation film was determined by EDS.This experiment result indicated that the oxidation film coatings had large lumps with lots of crackles by SEM experiments and that the oxidation film consisted of oxygen,aluminum,manganese,cobalt and chromium and that the treated Al without sealing had a lower corrosion resistance in 3.5% NaCl solution,but the samples sealed by K2Cr2O7 has a good corrosion resistance in 3.5% NaCl solution.

    参考文献
    相似文献
    引证文献
引用本文

王爱荣; 朱芳坤; 杨凤霞; 安彩霞.5A05铝合金黑色氧化膜的结构及耐蚀性能[J].宇航材料工艺,2010,40(1).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
文章二维码