超低温用碳纤维增强树脂基复合材料的性能研究
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TB332

基金项目:


Performance of Ultra-Low Temperature Carbon Fiber Reinforced Resin Based Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    根据低温液氧贮箱的缠绕工艺与特殊使用环境要求,分别针对3种自制的环氧树脂体系进行系统的工艺特性与低温抗裂纹性能研究。在此基础上以T700纤维复合材料为研究对象,详细考察其在超低温和高低温循环条件下的力学性能稳定性,并对其液氧相容性进行测试。最终以小型碳纤维复合材料筒体进行综合性能验证。研究结果表明,SFC-3环氧树脂具有较好的缠绕工艺特性,且在超低温和高低温交变条件下具有优异的抗裂纹特性。T700/SFC-3环氧复合材料分别经过高低温交变和超低温处理后,拉伸性能保留率在92%以上,且该复合材料具有良好的液氧相容性。T700/SFC-3环氧树脂复合材料筒体具有极好的耐高低温稳定性和气密性。

    Abstract:

    According to the requirements of winding technology and special use environment of low temperature liquid oxygen tank, the technological characteristics of three kinds of self-made epoxy resin and the property of low temperature crack resistance were studied. Then, the mechanical properties of T700 carbon fiber reinforced composites were investigated under ultra-low temperature and high-low temperature cycling treatments. Finally, a small carbon fiber reinforced composite cylinder was used for the comprehensive performance test. The results showed that SFC-3 epoxy resin had better winding technology and excellent crack resistance property under ultra-low temperature and high-low temperature cycling treatments. After the aforementioned treatments, the tensile performance retention rates of T700/SFC-3 epoxy composites were above 92% respectively, and the composite material had good liquid oxygen compatibility. T700/SFC-3 epoxy resin composite cylinder had excellent high and low temperature stabilities and gas tightness.

    参考文献
    相似文献
    引证文献
引用本文

王晓蕾,王芳,刘千立,王钧,田杰.超低温用碳纤维增强树脂基复合材料的性能研究[J].宇航材料工艺,2018,48(5):34-38.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2017-11-06
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-10-19
  • 出版日期:
文章二维码