Home > Archive>Volume 45, Issue 6, 2015 >
PDF HTML XML Export Cite reminder
Drilling Carbon Fiber Reinforced Plastics With Double Cone Drill
DOI:
CSTR:
[cstr]
Author:
Affiliation:

Clc Number:

TG52

Fund Project:

  • Article
    • |
  • Figures
    • |
  • Metrics
    • |
  • Reference
    • |
  • Related
    • |
  • Cited by
    • |
  • Materials
    • |
  • Comments
    Abstract:

    The double cone drill and twist drill were used to drill T700 carbon fiber reinforced plastics
    (CFRP). The drilling axial force, hole exit quality and surface roughness were used to analysis the double cone drill
    hole making features under different processing parameters. Compared with carbide twist drill, the double cone drill
    performed excellent cutting performance because of its drilling axial force reduced by about 20%, the hole exit quality
    is better, and the hole surface roughness is smaller. So, the double cone drill is more suitable for drilling CFRP.

    Reference
    Related
    Cited by
Get Citation

Copy
Share
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:
  • Revised:
  • Adopted:
  • Online: November 28,2016
  • Published:
Article QR Code

You are the visitor

Beijing Public Network Security：11010602060147号 京ICP备06019415号-2

Address：P.O.Box 9200-73, Beijing 100076, P.R.China

Postcode：100076 Fax：010-68383237

ServiceTel：010-68383269 E-mail：703@china.com

Copyright：Aerospace Materials ＆ Technology ® 2025 All Rights Reserved