基于柔度曲率矩阵的复合材料脱层损伤识别研究
DOI:
作者:
作者单位:

天津市现代机电装备技术重点实验室

作者简介:

通讯作者:

中图分类号:

TB332

基金项目:


Delamination Damage Identification of Composite Based on Flexibility Curvature Matrix
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用复合材料的模态柔度曲率矩阵探讨了复合材料构件的无损检测方法。通过模态分析获得脱 层复合材料梁的各阶固有频率及节点振型,计算得到模态柔度曲率矩阵判断复合材料梁的脱层损伤。基于梁 结构损伤检测理论发展了基于柔度曲率矩阵的复合材料板结构脱层损伤识别理论,即纵向柔度曲率矩阵和横 向柔度曲率矩阵。算例分析表明:对于单一脱层损伤,纵向和横向柔度曲率突变率分别是3. 6310、5. 4078 倍。 对于多处脱层损伤,小损伤处纵向和横向柔度曲率突变率分别是3. 5350、5. 902 8 倍;大损伤处纵向和横向柔 度曲率突变率分别是5. 680 3、10. 010 9 倍。突变位置与预设的脱层位置一致。说明纵向和横向柔度曲率均能 判断复合材料脱层损伤的位置和大小,且相对来说,纵向柔度曲率损伤识别效果更好于横向柔度曲率。

    Abstract:

    In this paper, the modal flexibility curvature matrix FCM of composite was used to discuss the NDT composite materials, the natural frequency of the composite beam and shift values of each node are simulated by modal analysis. The damage of composite beam is detected by calculating the modal flexibility curvature matrix. According to the beam theory we put forward a new theory based on the modal flexibility curvature matrix to detect the damage of composite plate,namely longitudinal and transverse flexibility curvature matrix. The results show that for a single de鄄 lamination, longitudinal and transverse flexibility curvature mutation rates were 3. 6310 and 5. 4078 times respecting. For multiple delamination the longitudinal and transverse flexibility curvature mutation rates were 3. 5350,5. 9028 times at the small damage location. While at the big damage location,the longitudinal and transverse flexibility curva鄄 ture mutation rates were 5. 6803,10. 0109 times. Mutation position of flexibility curvature mutation coincides with the preset position. So longitudinal and horizontal flexibility curvature can determine the location and size of composite de鄄 lamination, and relatively speaking, longitudinal flexibility curvature works better than transverse flexibility curvature in damage detection.

    参考文献
    相似文献
    引证文献
引用本文

李菊峰.基于柔度曲率矩阵的复合材料脱层损伤识别研究[J].宇航材料工艺,2015,45(5).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭