复合材料非平面连接接头强度预测
DOI:
作者:
作者单位:

北京机电工程研究所

作者简介:

通讯作者:

中图分类号:

基金项目:


Tensile Strength Prediction of Out-of-Plane Composite Joints
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基于渐进损伤分析方法,对一种复合材料非平面连接接头承受轴向拉伸载荷作用下的失效强度
    进行了研究,建立了三维渐进损伤有限元模型预测连接结构的失效行为,预测的失效载荷和载荷-位移曲线与
    试验结果的对比一致,验证了分析的有效性。

    Abstract:

    Based on the progressive damage analysis method,the failure of an out-of-plane composite joint under
    axial tensile loading is investigated. A progressive damage model consisting of a three dimensional FEM model is established
    to predict the failure behavior of the joint. The predicted failure load and load-displacement curve are validated
    by the experimental results.

    参考文献
    相似文献
    引证文献
引用本文

周小红.复合材料非平面连接接头强度预测[J].宇航材料工艺,2015,45(4):31-34.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭