树脂含量对F-8H3/602 芳纶复合材料性能的影响
DOI:
作者:
作者单位:

航天材料及工艺研究所

作者简介:

通讯作者:

中图分类号:

V258

基金项目:


Effect of Resin Content on Performances of Aramid Fiber Reinforced Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    探索研究了F-8H3/602 芳纶织物增强树脂基复合材料层合板不同树脂含量对其冲击韧性、层间
    剪切强度及弯曲性能的影响,并采用显微镜及扫描电镜对破坏试样形貌进行观察。结果表明芳纶复合材料的
    树脂含量对其冲击韧性、层间剪切强度及弯曲性能影响较为明显,树脂含量为46. 02wt% 的芳纶复合材料层合
    板的0毅冲击韧性为22 J/ cm2、0毅层间剪切强度为49. 1 MPa、0毅弯曲强度为506 MPa;在一定的树脂含量下,芳纶
    复合材料的0毅冲击韧性、层间剪切强度及弯曲性能较90毅的性能更优异;破坏试样的形貌表明纤维与树脂界面
    结合较为薄弱。

    Abstract:

    The F-8H3/602 aramid fiber reinforced composites laminates with different content of epoxy resin
    were prepared. The effect of resin content on impact toughness, interlaminar shear strength and flexural properties
    were studied. The morphologies of damaged samples were observed by microscope and scanning electronic microscopy
    (SEM). The results indicated that impact toughness, interlaminar shear strength and flexural properties were close re鄄
    lated to the resin content of aramid fiber reinforced composites. For F-8H3/602 aramid fiber reinforced composites
    with 46. 02wt% resin content, the impact toughness, interlaminar shear strength and flexural strength were 22 J/ cm2,
    49. 1 MPa and 506 MPa respectively. At certain weight content of resin, the mechanical properties of aramid fiber re鄄
    inforced composites in 0毅direction were much better than in 90毅direction. The interface between fiber and matrix of F
    -8H3/602 composites was weak according to SEM images of samples.

    参考文献
    相似文献
    引证文献
引用本文

易凯.树脂含量对F-8H3/602 芳纶复合材料性能的影响[J].宇航材料工艺,2015,45(2).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭