碳纤维特性对C/ C 复合材料界面性能的影响
作者:
作者单位:

北京航空材料研究院

作者简介:

白侠,1980 年出生,高级工程师,主要从事C/ C 复合材料的研究工作。

通讯作者:

中图分类号:

基金项目:


Effect of Cf Characteristics on Interface Properties of C/ C Composite
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    分别采用扫描电镜、比表面积与孔体积分析仪等手段对日丝(RS-Cf ) 和美丝(MS-Cf ) 两种碳纤 维进行表面状态表征分析,通过纤维顶出试验、冲剪强度和弯曲强度对两种纤维制备的C/ C 复合材料界面性 能进行了微观和宏观测试,研究了不同表观结构纤维对C/ C 复合材料界面性能的影响。纤维表面形貌观察结 果表明:圆形RS-Cf 表面沟槽比腰果形MS-Cf 明显,但沟槽数量少于MS-Cf,而MS-Cf 的比表面积、孔体积和 孔径均大于RS-Cf。RS-C/ C、MS-C/ C 复合材料界面强度分别为2. 98 和3. 80 MPa;RS-C/ C 复合材料的弯曲 和冲剪强度分别为55. 9 和32. 0 MPa,低于MS-C/ C 复合材料的65. 0 和35. 2 MPa,微观和宏观力学性能均表 明MS-C/ C 复合材料的界面强度高于RS-C/ C 复合材料。

    Abstract:

    The surface characteristics of RS and MS carbon fibers were analyzed by using the scanning electron microscopy,specific surface area and pore volume test equipment. The interface properties of C/ C composite were tested by carbon push down method, bend strength and impact shear strength. The results show that the section of RS -Cf is circular and MS-Cf is kidney. The surface groove of RS-Cf fiber is clear, but obviously less than MS-Cf. The Special surface area and pore volume of MS-Cf are more than RS-Cf. The interface strength of MS-C/ C composite is higher than that of RS-C/ C composite,because the interface strength, bend strength and impact shear strength of MS -C/ C composite are 3. 80 MPa,65. 0 MPa and 35. 2 MPa respectively,being higher than RS-C/ C composite’ 2. 98 MPa, 55. 9 MPa and 32. 0 MPa.

    参考文献
    相似文献
    引证文献
引用本文

白 侠,唐 辉,肖 春,李冬娟.碳纤维特性对C/ C 复合材料界面性能的影响[J].宇航材料工艺,2014,44(3):48-50.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2014-04-04
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭