新型高温黏结剂的制备及性能研究
DOI:
作者:
作者单位:

航天材料及工艺研究所

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation and Performance of High Temperature Adhesive
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用聚碳硅烷作为黏结剂主体,添加陶瓷组元的方法制备了新型耐高温黏结剂。采用流变仪研
    究了黏结剂的流变性能,采用TGA、XRD 及SEM 等方法研究了黏结剂的性能以及各组分含量与黏结剂性能之
    间的关系。结果表明:高温黏结剂具有良好的高温热稳定性及粘结强度,1 200℃质量损失为16%,平均粘结强
    度为23. 4 MPa。

    Abstract:

    A high temperature adhesive was prepared by adding ceramic powders (SiC, ZrC, Si or Zr etc. ) to
    polycarbosilane. Its rheology investigated by rheometer, The properties and relationship between component and properties
    of adhesive were investigated by means of TGA, XRD and SEM. The results suggested that adhesive possessed
    good high temperature resistance and adhesive intensity. The weight loss was 16wt% in 1 200℃(N2 atmosphere),and
    its adhesive intensity was 6. 4 MPa.

    参考文献
    相似文献
    引证文献
引用本文

胡继东.新型高温黏结剂的制备及性能研究[J].宇航材料工艺,2013,43(6).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭