MWCNT/ E 复合材料的制备及性能
DOI:
作者:
作者单位:

中国科学院苏州纳米技术与纳米仿生研究所

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation and Properties of MWCNT/ E Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用三辊研磨分散技术制备了MWCNT/ E 复合材料。通过调节三辊研磨机入料辊和中辊的间
    距,使MWCNT 在环氧树脂中均匀分散。所制备的MWCNT/ E 复合材料与纯环氧树脂相比,拉伸强度提高了
    22%,弯曲强度提高了15%,导电性和导热性都得到明显改善。

    Abstract:

    Nanocomposites consisting of multi-walled carbon nanotubes( MWCNT) and an epoxy matrix were
    produced by three roll mill. A very good dispersion of MWCNT in an epoxy resin could be observed by optimizing the
    processing conditions. Compared to epoxy,the tensile and flexural strength of the as-processed nanocomposites are increased
    by 22%,15%, respectively, and the electrical conductivity and thermal conductivity are significantly improved.

    参考文献
    相似文献
    引证文献
引用本文

魏晗兴. MWCNT/ E 复合材料的制备及性能[J].宇航材料工艺,2013,43(6).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭