7003 铝合金双级双峰时效工艺优化
DOI:
作者:
作者单位:

嘉兴职业技术学院

作者简介:

通讯作者:

中图分类号:

基金项目:


Double-Peak Aging Technology Optimization in 7003 Aluminum Alloy
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    设计了L9(34)的双级时效正交试验方案,系统地研究了双级双峰时效工艺、时效硬化特性和力
    学性能。结果表明:终时效对合金的力学性能具有决定性的影响,合金的硬度、强度对终时效温度最敏感,合金
    的塑韧性则对终时效时间最敏感;利用“ 双峰” 特征对正交试验所得的具有高塑性、高韧性的相对最佳工艺进
    行强度优化,发现对应不同的目标性能,有最优双级时效工艺与之相应,并没有发现各性能指标同时达到最大
    值的理论最优工艺,只能获取一种相对的最优工艺,即在保证接近单级峰时效强度的前提下选择塑、韧性最佳
    的工艺——— 105℃ /4 h+155℃ /70 h。

    Abstract:

    Two-stage double-peak aging process, aging hardening characteristics and mechanical properties are
    systematically studied by design of the L9(34) orthogonal test in this paper. The second stage in the whole aging has
    a decisive impact on the mechanical properties of the alloy, hardness and strength are more sensitive to final aging
    temperature while plasticity and toughness are more to final aging time. It can be found that there is an optimal dual
    aging process corresponding to the different performance, when use double-peak to optimized the process of high plasticity,
    high toughness coming from the orthogonal test. It is found the performance index can not reach the theoretical
    optimum maximum, and only a relative optimal process is obtained. We found that the best two-stage double-peak aging
    process is:105℃ /4 h+155℃ /70 h.

    参考文献
    相似文献
    引证文献
引用本文

毛 杰.7003 铝合金双级双峰时效工艺优化[J].宇航材料工艺,2013,43(3).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭