航天用铝合金/ 焊丝焊接性研究
DOI:
作者:
作者单位:

航天材料及工艺研究所

作者简介:

通讯作者:

中图分类号:

基金项目:


Weldability of Aluminum Alloys/ Filler for Aerospace
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对2A14、2219、2195、2A97、1460 铝合金,通过焊接热模拟试验、焊接裂纹敏感性试验和拉伸试
    验,建立了材料脆性温度区间大小和焊接性的关系及焊丝主成分和焊接性的关系。结果表明,试验合金焊接性
    从好到差的排列顺序为2219、2A14、1460、2195、2A97。其中2A14、2219 铝合金现用焊丝可以满足推进剂贮箱
    用铝合金焊接性要求。脆性温度区间较小时,焊接性良好,随脆性温度区间增加,焊接性变差;采用满足主成分
    含量之和为6%的焊丝焊接时,若抗裂性满足要求,则接头延伸率满足要求。

    Abstract:

    Through experiments of welding thermo-simulation,welding crack sensitivity and tension on aluminum
    alloys marked 2A14,2219,2195,2A97,1460, relationships between BRT and weldability,total content of main
    elements in welding wire and weldability are established. Results show that the less BRT, the better weldability; when
    6% of total cintent of main element is used in the welding wire,joint elagation will be eligible if the ability anticrack
    is good. Rank of weldability is 2219,2A14,2195,2A97.

    参考文献
    相似文献
    引证文献
引用本文

焦好军.航天用铝合金/ 焊丝焊接性研究[J].宇航材料工艺,2013,43(3).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭