航天用硅橡胶制品贮存试验技术研究进展
DOI:
作者:
作者单位:

二炮装备研究院

作者简介:

通讯作者:

中图分类号:

基金项目:


Research Progress on Storage Aging Tests Technology ofSilicone Rubber for Spaceflight Application
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    主要对航天用硅橡胶制品的贮存试验研究进展情况进行了梳理总结,在此基础上指出目前存在
    以下三方面不足:自然贮存试验开展得少而且数据没有充分挖掘、利用;单应力加速老化试验开展得多,综合应
    力加速试验开展得少;贮存试验中对产品宏观性能变化关注得多,对其微观结构变化和老化机理研究得少。针
    对这些问题,指出了今后应在自然贮存试验信息的积累和应用、综合应力贮存试验和贮存老化机理等方面加强
    研究。

    Abstract:

    Research progress on storage aging tests of silicone rubber for spaceflight application was reviewed
    and analyzed in this paper. There are three problems in the present storage aging researches. Firstly, accelerated aging
    tests (be abbreviated to AAT) were largely conducted but natural aging tests (be abbreviated to AAT) were conducted
    much fewer. Secondly, AAT with a single accelerated stress was largely conducted but AAT with multi accelerated
    stress was conducted much fewer. Finally, the variations of macroscopical performances had attracted too much
    attention but the aging mechanism and variations of microcosmic structures were concerned too little. Based on the
    problems mentioned above, three research fields including data accumulation in AAT and its applications, AAT with
    multi accelerated stress and aging mechanism of silicone rubber should be emphasized in the future researches.

    参考文献
    相似文献
    引证文献
引用本文

张国彬.航天用硅橡胶制品贮存试验技术研究进展[J].宇航材料工艺,2013,43(1).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭