2524铝合金的搅拌摩擦焊对接工艺
DOI:
作者:
作者单位:

上海飞机设计研究院

作者简介:

通讯作者:

中图分类号:

基金项目:


ButtProcessofFrictionStirWeldingfor2524Aluminum Alloys
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以2524-T3板材作为试验材料,研究了薄板的搅拌摩擦焊对接工艺,优化了对接焊的工艺参
    数,获得了焊接工艺窗口及最优工艺参数。在最优工艺参数下生产的对接焊件具有良好的质量外观,焊件的变
    形量和焊缝减薄量极小;焊件的X射线检测结果表明焊件内部质量良好,没有在照片上发现缺陷;金相组织分
    析显示,焊缝横截面组织均匀致密;焊接接头静力拉伸性能测试结果表明焊缝抗拉强度的平均为397MPa,为
    母材抗拉强度的90.4%。

    Abstract:

    Buttweldprocessoffrictionstirweldingforthinslabarestudiedinthispaper,2524-T3
    plateareselectedastestingmaterials.Thejoiningprocessisoptimizedtoobtainthewindowofweldprocess
    andthebestprocessparameters.Thebuttweldproducedinoptimizedprocessparametershaveanexcellent
    appearance,asthedeformationandthethicknessreductionofweldarelittle;X-rayinspectionresultsshow
    theinnerqualityofweldsisgood,andnodefectsarefoundinthepicture;metallographicanalysisindicates
    thetextureofweldincross-sectionisuniformanddense;mechanicalpropertytestresultshowsthatthe
    meantensilestrengthofbuttjointis397MPa,whichisthe90.4% ofbasemetal’stensilestrength.

    参考文献
    相似文献
    引证文献
引用本文

郭辉华 李明仁 贺地求 徐 亮.2524铝合金的搅拌摩擦焊对接工艺[J].宇航材料工艺,2011,41(6).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭