T800/5228A 层合板I 型断裂韧性优化
DOI:
作者:
作者单位:

北京航空材料研究院,先进复合材料国家重点实验室

作者简介:

通讯作者:

中图分类号:

基金项目:


Mode I Fracture Toughness Optimizing on T800/5228A Composite Laninate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    冷场发射扫描电镜表明,固化5228A/ PAEK 共混体系发生了反应诱导相分离,相形貌依次经历
    了海岛-双连续-相反转的演化过程; DMA 试验表明,PAEK 的引入对5228A 基体树脂Tg 略有影响,但基本不
    会改变原有树脂体系的使用温度;T800/5228A 经韧化后,在层间内形成了典型的相反转结构,裂纹扩展路径呈
    现出波纹状,明显区别于原有的光滑平直裂纹路径,玉型层间断裂韧度(GIC)大幅度提高。

    Abstract:

    Reaction induced phase separation takes place in 5228A/ PAEK compound cure process, and cured
    phase microstructure experiences sea isaland cocontinue phase separation transition accompany PAEK content arising.Further DMA test shows that PAEK induced lowers glass transition temperature of neat 5228A matrix resin in some degree, but does not change its applied temperature. Mode I fracture tougheness shows that the spread route of crack of toughened T800/5228A composite laminate presents wave like characterization, differring from smoothly stright feature for original composite,since phase separation microstructure in toughened composite enforces crack lip unceasingly adjusting orientation in PAEK phase of high tougheness when confronting 5228A microstructure ball, therefore mode 玉
    fracture tougheness ascends greatly.

    参考文献
    相似文献
    引证文献
引用本文

刘立朋 张明 安学锋 唐邦铭 刘立朋 张明 安学锋 唐邦铭 益小苏. T800/5228A 层合板I 型断裂韧性优化[J].宇航材料工艺,2011,41(5).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭