纤维表面处理对PBO/ 环氧界面性能的影响
DOI:
作者:
作者单位:

西北工业大学理学院应用化学系

作者简介:

通讯作者:

中图分类号:

基金项目:


Effect of Fiber Surface Treatment on Interface Performance ofPBO/ Epoxy Resins Composite
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为提高PBO 纤维/ 环氧树脂的剪切强度,采用聚合物涂层法对PBO 纤维进行表面改性。通过
    NOL 环复合材料层间剪切强度测试,研究不同浓度的表面涂层处理液、不同浸渍工艺对复合材料层间剪切强
    度的影响。结果表明:PBO 纤维表面经不同涂层处理液处理后,层间剪切强度均高于未经表面处理的;当PBO
    纤维经过以涂层A 为一浴浸渍液、涂层B 为二浴浸渍液的两次浸渍工艺处理后,层间剪切强度最高,比未经表
    面处理的提高了61%。

    Abstract:

    This article studies the surface modification of PBO fiber by using the polymer coating method. The
    impact of surface coating treatment liquor with different concentration and different impregnation process on interlaminar shear strength of the composite materials is investigated through NOL ring interlamminar shear strength test. The results show that the treatment of surface through coating method can increase composite interlaminar shear strength.When the PBO fiber surface after the treatment of twice impregnation process,the efficiency is most obvious. The interlaminar shear strength up to 61% higher than that of the fiber without surface treatment.

    参考文献
    相似文献
    引证文献
引用本文

岳震南 黄英 王岩 季文 牛芳芳.纤维表面处理对PBO/ 环氧界面性能的影响[J].宇航材料工艺,2010,40(6).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭