硅烷偶联剂改性Al2 O3p/TDE-85 的力学性能
DOI:
作者:
作者单位:

内蒙古工业大学材料科学与工程学院,呼和浩特 010051

作者简介:

通讯作者:

中图分类号:

基金项目:


Mechanical Properties of SCA-Modified Al2 O3p/TDE-85
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用硅烷偶联剂对Al2O3 颗粒进行表面改性,制备了Al2 O3 颗粒增强的TDE-85 树脂基复合材
    料,研究了表面改性对其力学性能的影响,采用差热分析仪测定复合材料的固化反应温度,并计算了固化反应
    活化能。利用扫描电子显微镜分析了拉伸断口形貌。研究发现,当Al2O3 用量为2wt% 时,固化反应速度较快,
    硅烷偶联剂用量为4wt%时,冲击强度为13. 2 kJ/ m2;拉伸强度为65. 2 MPa;弹性模量为2. 66 GPa;最大伸长率
    为3. 35%,此时对Al2O3颗粒的表面改性综合效果最好。

    Abstract:

    The Al2O3 particles reinforced TDE-85 resin-based composite materials was prepared;surface modification technique was applied to the Al2O3 particles by using silicon hydride coupling agent (SCA). The effect of surface modification on mechanical properties was studied. The solid reaction temperature of composite materials was measured and the activation energy was calculated, the tensile fracture surface was observed with a scanning electron microscope. The experimental results show that when the content of Al2 O3 particles is 2wt%, the reaction speed is faster. Moreover, when the content of silicon hydride coupling agent arrives at 4wt%, the surface modification of Al2O3 particles is the best, and the comprehensive mechanical properties of composite can be improved.

    参考文献
    相似文献
    引证文献
引用本文

赵新苓 王科 史志铭.硅烷偶联剂改性Al2 O3p/TDE-85 的力学性能[J].宇航材料工艺,2010,40(4).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭