含醚结构双苯并环丁烯树脂的合成与性能
DOI:
作者:
作者单位:

海军驻中国运载火箭技术研究院代表室,北京 100076

作者简介:

通讯作者:

中图分类号:

基金项目:


Synthesis and Properties of Novel Bis-Benzocyclobutene EndcappedMonomers Containing Ether Structures
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以4-溴苯并环丁烯为封端剂,在氯化亚铜催化下,与双酚A 和双酚N 发生亲核取代反应,合成
    了两种双苯并环丁烯封端的含醚单体BCB-1 和BCB-2。两种单体的熔融温度低于100益,在100-200益熔体
    黏度低于1 Pa·s,表现出宽的加工窗口和良好的成型工艺性能。BCB-1 和BCB-2 两种树脂固化物的Tg 分别
    为269 和232益,T5d5%分别为450 和433益,介电常数分别为2. 88 和2. 58,损耗因子分别为8. 410-3 和2. 710-3,表现出良好的耐热稳定性和优异的介电性能。其中BCB-2 树脂由于在分子结构中引入了具有低摩尔极
    化度的大体积侧基—CF3,因此表现出更低的介电常数和损耗因子。

    Abstract:

    Two novel bis-benzocyclobutene-terminated monomers containing ether structure, BCB-1 and BCB-2
    were synthesized by the nucleophillic reaction between 4-bromobenzocyclobutene and bisphenol A or N,by using cuprous chlorine as catalyzer. The cure behavior and processability of the two monomers were evaluated by DSC and rheometer. After curing,the thermal stability and dielectric properties of these cured resins were also investigated. The experimental results indicate that these monomers possess excellent processability,and that the cured resins derived from
    them have good thermal stability and outstanding dielectric properties.

    参考文献
    相似文献
    引证文献
引用本文

王在铎 左小彪 余瑞莲 李杰 冯志海.含醚结构双苯并环丁烯树脂的合成与性能[J].宇航材料工艺,2010,40(4).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭