高压球形气瓶焊缝结构设计与焊接工艺
DOI:
作者:
作者单位:

兰州空间技术物理研究所,兰州 730000

作者简介:

通讯作者:

中图分类号:

基金项目:


Welding Line Design and Welding Process of Sphere High-Pressure Vessel
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    研究了气瓶赤道焊缝区的结构优化设计和焊接工艺改进措施,焊缝区渐变补强设计提高了焊缝
    区的应变协调性,改进电子束与焊缝作用方式解决了内部飞溅问题,采用优化的电子束工艺参数进行焊接。结
    果表明:焊接接头质量达到了GJB1718A—2005《电子束焊接》标准玉级焊缝,焊缝及热影响区力学性能与母材
    相当,气瓶进行鉴定试验,性能指标满足设计要求。气瓶焊缝结构优化设计,降低了焊缝处应力水平,减少应力
    集中,通过改进焊接工艺提高了电子束焊缝质量。

    Abstract:

    This paper discusses the optimum design and welding process of the welding line. When the thichness
    of the welding line area increases gradually, the strain in this area is coordinative. The improvement of mutual effect between welding line and EB can solve the problem of splash and the quality of welding line corresponds to the standard of GJB 1718A—2005. The mechanical properties of welding line, heat affect zone and raw material are approximately equivalent, the characteristics of the pressure vessel satisfy the design. The optimum design leads the stress of
    welding line to decrease, the improvement of welding process increases the quality of welding line, the optimum design of welding line and improvement of welding process is the measure of improvement of welding quality and it is agreat significance of enhancement of pressure vessel performance.

    参考文献
    相似文献
    引证文献
引用本文

于斌 靳庆臣 何俊 刘志栋 程彬.高压球形气瓶焊缝结构设计与焊接工艺[J].宇航材料工艺,2010,40(4).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭