电火花加工中极性效应的研究
DOI:
作者:
作者单位:

西北工业大学

作者简介:

通讯作者:

中图分类号:

基金项目:


Discussion on Polarity Effect in EDM
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对电火花放电机理中的极性效应这一问题做了进一步的研究。为考察两电极的蚀除情况,进行了单脉冲实验,结果发现在煤油中大脉宽放电条件下正极的蚀除量大于负极,这与实际加工中的结果不符。通过参考和分析等离子通道中电子和正离子的运动,并对上述现象给出了探讨性的解释。

    Abstract:

    The problem of polarity effect in EDM is researched in this paper.In order to find out deterioration of anode and cathode,experiment with single pulse is taken in kerosene oil.The deterioration of anode is found larger than that of cathede even in the condition of large pulse width,which is contradictory to deterionition in EDM machining with continuous pulses.This phenomenon above may be explained through analyzing the movement of electron and positive ion in plasma canal.

    参考文献
    相似文献
    引证文献
引用本文

赵伟%任中根%迟恩田.电火花加工中极性效应的研究[J].宇航材料工艺,2001,31(2).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭