瓜瓣模上定位销孔的改进加工工艺
作者:
作者单位:

首都航天机械有限公司,北京 100076

作者简介:

张大勇,1987年出生,硕士生,主要从事数字化制造和装配工作。 E-mail:522951482@qq.com

通讯作者:

中图分类号:

V461

基金项目:


Improved Processing Technology of Positioning Pin Hole on Melon Mold
Author:
Affiliation:

Capital Aerospace Machinery Co., Ltd, Beijing 100076

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对瓜瓣阳模上定位销孔加工的找正误差大、实物与数模不一致、加工成本高的难题,通过改进找正方法,粗、精找正结合,并利用3D寻边器进行程序验证的思路,实现了理论数模和实物的精确对齐、找正。在此基础上通过椭球参数方程的坐标转换,实现了在3轴机床上对椭球面上法向和轴向定位销孔的加工。结果表明,采用改进后的加工方法,孔的位置精度达到Φ0.1 mm,加工成本降低75%,可在工程应用中加以推广。

    Abstract:

    To solve the problems such as big alignment deviation, inconsistency between the entity and the digital model and high processing cost in the processing of the positioning pin hole on the melon petal male mold, the alignment method was improved. By combining coarse alignment and fine alignment, as well as using the 3D edge finder to perform the program verification, the goal of accurate alignment between the theoretical digital model and the entity was achieved. On this basis, through the coordinate transformation of the ellipsoid parameter equation, the processing of the normal and axial positioning pin holes on the ellipsoid surface on the 3-axis machine tool is accomplished. Consequently, with the help of the improved processing method, the hole position accuracy reaches Φ0.1 mm and the processing cost is reduced by 75%. This improved method should be promoted and utilized in engineering applications.

    参考文献
    相似文献
    引证文献
引用本文

张大勇,赵文利,尉晓霞,刘继军,孙勇跃.瓜瓣模上定位销孔的改进加工工艺[J].宇航材料工艺,2021,51(1):94-98.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2020-05-07
  • 最后修改日期:2021-01-07
  • 录用日期:2020-07-23
  • 在线发布日期: 2021-02-19
  • 出版日期: 2021-02-28
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭