基于视觉的模型烧蚀形貌实时测量方法
作者:
作者单位:

中国航天空气动力技术研究院,北京 100074

作者简介:

陈丁,1979年出生,高级工程师,主要从事风洞试验测试技术研究工作。E-mail:ringing282@163.com

通讯作者:

中图分类号:

TB89

基金项目:


A Vision-Based Method for Real-Time Measurement of Ablative Pattern
Author:
Affiliation:

China Academy of Aerospace Aerodynamics,Beijing 100074

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对电弧风洞试验时模型烧蚀形貌实时的变化问题,使用数字散斑相关结合双目视觉的方法直接测量得到了模型烧蚀过程的形貌变化历程。利用散斑相关来进行图像数据的处理,同时综合了亚象素相关算法。通过测量获得了模型烧蚀过程的形貌实时变化情况。标定结果表明标定精度达到了0.02 mm;试验结果表明,测量方法可以为分析平板模型随烧蚀时间变化而变化的特性提供有效的试验数据。

    Abstract:

    This paper developed a novel method which involved binocular stereo vision to measure the model ablative pattern directly regarding the ablative pattern which was under testing in the arc heated wind tunnel. This method used the speckle correlation to process the data, combined sub-pixel correlation can make the results achieve very high precision. The real planar measuring results was obtained after the test was done on a flat model.The calibrate precision of the measure system is 0.02 mm. The results verified that this method can be useful for the analysis of the model characterize related with ablative time.

    参考文献
    相似文献
    引证文献
引用本文

陈丁,余奕甫,康国剑,陈连忠.基于视觉的模型烧蚀形貌实时测量方法[J].宇航材料工艺,2019,49(4):86-92.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2018-09-10
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2019-08-30
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭