碳纤维复合材料/钛合金叠层钻孔工艺优化
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TG52;V262.4

基金项目:


Process Optimization for Drilling of Laminated Carbon Fiber Reinforced Plastic and Titanium Alloy Materials
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在不同的工艺参数下用硬质合金麻花钻分别对碳纤维复合材料板和碳纤维复合材料板/钛合金叠层板进行钻孔,对钻孔过程用Abaqus有限元软件进行三维仿真,对比仿真和试验结果的轴向力和制孔效果。结果表明,在保证制孔的质量的前提下,选取合理的工艺参数,得到叠层材料制孔的工艺参数的优化结论。

    Abstract:

    The drilling process of CFRP and CFRP/Titanium stacks under various processing parmeters with twist drill was studied. And the process of drilling was simulated by using the finite element software Abaqus of 3d simulation module.Comparing critical thrust force and drilling hole quality of the simulation and test result, it shows that choose reasonable processing parameters under the premise of ensuring the quality of the hole, the optimum conclusions about processing parameters of drilling stacks materials can be obtained.

    参考文献
    相似文献
    引证文献
引用本文

刘俊义,孙会来,聂晓菊,赵方方.碳纤维复合材料/钛合金叠层钻孔工艺优化[J].宇航材料工艺,2018,48(2):78-81.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2017-05-31
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-04-13
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭