卫星热控涂层地面模拟试验与在轨验证比对分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ63

基金项目:


Comparative Analysis of Ground Simulation Test Results and In-Orbit Test Results of Satellite Thermal Control Coating Under Space Environment
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    卫星在轨运行期间,热控涂层要经受空间复杂环境效应的影响,其光学和热控性能逐渐下降,影响卫星可靠性和寿命。本文利用卫星搭载技术,完成热控涂层5年的在轨试验,验证空间多因素环境对热控涂层的影响。同时,利用地面模拟试验装置,模拟空间质子、电子、紫外等5年的辐照剂量对热控涂层的作用。对在轨试验结果进行解读和分析,并与地面模拟试验结果进行比对。结果显示,在搭载试验和地面试验前,热控涂层太阳吸收比(αs)为0.12,经5年在轨搭载试验后,αs退化为0.23。经地面模拟试验后,αs退化为0.22。搭载试验和地面试验的热控涂层性能均呈现线性退化规律,表明在确定的轨道环境和固定的剂量率条件下,热控涂层的退化与环境作用时间正相关,同时验证了地面试验的有效性。

    Abstract:

    During in-orbit operation, the optical and thermal control performances of satellite thermal control coating will degrade due to integrated space environment effects and hence has a great impact on reliability and lifetime of satellites.In this paper, an in-orbit experiment of thermal control coatings is carried out for 5 years to investigate the influence of multi-factors environment. And the sensitive factor of coating performance is achieved and then the in-orbit property evolution law and life prediction model are built.Meanwhile, a ground simulation experiment with proton, electron and ultraviolet irradiation factors is carried out to study the influence of those factors on thermal control coatings.The results demonstrate that the absorptance of thermal coatings increase from 0.12 to 0.23 after 5-years' in-orbit operation while this value increases to 0.22 after the ground simulation test with the equivalent radiation dose.The thermal control performance degradation and test time or irradiation dose are linear related and positive correlated both in orbit and on ground, which has also verified the effectiveness of ground test.

    参考文献
    相似文献
    引证文献
引用本文

刘刚,王简,王惠芬.卫星热控涂层地面模拟试验与在轨验证比对分析[J].宇航材料工艺,2017,47(3):64-66,70.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2016-10-27
  • 最后修改日期:2017-04-06
  • 录用日期:
  • 在线发布日期: 2017-06-06
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭