加工工艺对C/ SiC 复合材料性能的影响
作者:
作者单位:

作者简介:

李晓东,1978 年出生,博士,主要从事C/ C、C/ SiC 复合材料研究工作。

通讯作者:

中图分类号:

基金项目:

863 计划(2013AA040103)


Influence of Machining Process Parameters on Property of C/ SiC Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用普通磨削和超声辅助磨削工艺对C/ SiC 复合材料进行加工,对不同加工工艺参数获得的C/ SiC 复合材料进行表面状态表征及力学性能的测试。结果显示在磨削深度0. 05 mm,进给速度600 mm/ h,转速 1 600 r/ min,超声频率14 kHz 的工艺参数匹配条件下,所得到的C/ SiC 复合材料的表面粗糙度最小,弯曲强度 最大。表明超声辅助磨削加工工艺对材料力学性能损伤较小。

    Abstract:

    In this paper, C/ SiC composites were machined by traditional grinding and ultrasonic vibration-assisted grinding. Surface characterizations and mechanical properties of the C/ SiC composites grinded under different processing parameters are measured. Results of performance test indicated that the composite material machined by ultrasonic assisted grinding process obtained the better surface roughness quality and the greater bending strength,the best processing parameters were: grinding depth 0. 05 mm, feed velocity 600 mm/ h, speed 1 600 r/ min, ultrasonic frequency 14 kHz. It shows that ultrasonic vibration-assisted grinding has the lower damage to material mechanical properties.

    参考文献
    相似文献
    引证文献
引用本文

李晓东,赵英民,张晓峰,林 彬.加工工艺对C/ SiC 复合材料性能的影响[J].宇航材料工艺,2015,45(4):104-107.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2015-06-03
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-03-09
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭