高模聚对苯撑苯并二噁唑复丝纤维拉伸性能测试方法
作者:
作者单位:

华东理工大学材料科学与工程学院,特种功能高分子材料及相关技术教育部重点实验室,上海 200237

作者简介:

夏菲,1993年出生,硕士,研究方向为高性能纤维材料。E-mail:18101817780@163.com

通讯作者:

中图分类号:

V257

基金项目:


Test Method of the Tensile Properties of HM-PBO Multifilament Fiber
Author:
Affiliation:

Key Laboratory of Specially Functional Polymeric Materials and Related Technology of the Ministry of Education,School of Materials Science and Engineering,East China University of Science and Technology,Shanghai 200237

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    参照相关的纤维力学性能测试标准,对高模型HM-PBO复丝纤维的拉伸性能测试方 法进行系统研究。结果表明:夹持型夹具和陶瓷材质夹具体适用于PBO干纱复丝拉伸性能测试;捻系数对PBO拉伸性能影响比较大,最佳捻系数为8;同时发现加捻会影响纤维的取向度;在一定范围内拉伸速率的增加会使得纤维断裂强度增加;而在测试范围内的预加张力对PBO纤维拉伸性能影响不大;夹持长度越长,由横梁测得的拉伸形变越接近真实值。

    Abstract:

    According to the relevant testing standards of fiber mechanical properties,the testing method of tensile properties of high model PBO bundle fiber was studied systematically.The results show that the clamping fixture and ceramic material fixture body are suitable for the tensile test of PBO dry yarn.The twist coefficient has a great influence on the tensile properties of PBO,and the optimum value is 8.It is found that twisting will affect the orientation degree of fiber.The increase of the stretching speed will increase the fracture strength of the fiber.The pre-tension has little influence on the tensile properties of the PBO fiber within the testing range.The longer the clamping length is,the closer tensile deformation measured by the crossbeam is to the real value.

    参考文献
    相似文献
    引证文献
引用本文

夏菲,丁剑峰,李欣欣.高模聚对苯撑苯并二噁唑复丝纤维拉伸性能测试方法[J].宇航材料工艺,2020,50(6):85-90.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2020-04-07
  • 最后修改日期:2020-04-07
  • 录用日期:2020-04-27
  • 在线发布日期: 2021-01-15
  • 出版日期: 2020-12-30
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭