SiCp/Al复合材料加工损伤及刀具优选研究进展
作者:
作者单位:

湖南科技大学机电工程学院,湘潭 411201

作者简介:

荆露,1996年出生,硕士研究生,主要从事难加工材料高速切削与超声振动辅助加工方面的研究。E-mail:hnustjl@163.com

通讯作者:

牛秋林,博士,主要从事难加工材料高速切削与超声振动辅助加工方面的研究。E-mail:qlniu2009@163.com

中图分类号:

TG501.1

基金项目:

国家自然科学基金项目 51605161国家自然科学基金项目(51605161)


Research Progress Processing Damage and Tool Optimization of SiCp/Al Composites
Author:
Affiliation:

School of Mechanical Engineering, Hunan University of Science and Technology, Xiangtan 411201

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    SiCp/Al复合材料中增强相SiC颗粒的存在降低了该材料的加工性能,使得其切削加工时产生一系列加工损伤。本文综述了SiCp/Al复合材料的加工缺陷类型、缺陷形成机理、缺陷控制策略和切削刀具的磨损机理与优选策略,并对今后SiCp/Al复合材料加工损伤研究进行了展望。

    Abstract:

    SiCp/Al composites have excellent comprehensive properties and have been widely used in the field of high and new technology. Meanwhile, the presence of SiC particles as reinforced phase in SiCp/Al composites makes SiCp/Al composites extremely difficult to cut, which easily causes a series of processing damage. In this paper, the machining defect types, defect formation mechanism, defect control strategy, tool wear mechanism and optimization strategy of SiCp/Al composites were summarized. And the research prospect of processing damage of SiCp/Al composites was discussed.

    参考文献
    相似文献
    引证文献
引用本文

荆露,牛秋林,李树健,邱新义,李鹏南. SiCp/Al复合材料加工损伤及刀具优选研究进展[J].宇航材料工艺,2019,49(6):7-12.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2019-07-07
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2019-12-30
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭