先进热塑性复合材料的制备工艺研究
作者:
作者单位:

北京宇航系统工程研究所,北京 100076

作者简介:

王世勋,1982年出生,高级工程,主要研究方向:航天运载器树脂基复合材料结构设计。E-mail:shixun100163.com

通讯作者:

中图分类号:

TB332

基金项目:


Fabrication Process of Advanced Thermoplastic Composites
Author:
Affiliation:

Beijing Institute of Astronautical Systems Engineering, Beijing 100076

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了探索高性能热塑性复合材料的制备方法,本文使用薄膜层叠法制备了碳纤维编织布增强聚苯硫醚(CFF/PPS)热塑性复合材料层合板。通过控制变量法研究了不同成型压力和制备温度对CFF/PPS复合材料层合板的成型质量的影响。通过弯曲试验和层间剪切试验表征不同工艺参数下的CFF/PPS复合材料层合板的力学性能,从而确定了成型压力及制备温度两个关键参数在不考虑耦合效应下的优化取值范围。研究结果表明,采用成型压力为5 MPa,制备温度为340℃制备的CFF/PPS复合材料层合板,其性能最佳。

    Abstract:

    To explore the fabrication methods of high-performance thermoplastic composites, carbon fiber braided polyphenylene sulfide (CFF/PPS) thermoplastic composite laminates were fabricated by thin film lamination method. The effects of different forming pressure and temperature on the forming quality of CFF/PPS composite laminates were investigated by controlling variable method. The mechanical properties of CFF/PPS composite laminates with different processing parameters were characterized by bending test and interlaminar shear test, and the optimum range of two key parameters, forming pressure and preparation temperature, was determined without considering coupling effect. The results show that CFF/PPS composite laminates have the best properties when the forming pressure and temperature are 5 MPa and 340℃,respectively.

    参考文献
    相似文献
    引证文献
引用本文

王世勋,王婧超.先进热塑性复合材料的制备工艺研究[J].宇航材料工艺,2019,49(4):28-33.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2018-11-06
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2019-08-30
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭