薄壁异形树脂基复合材料近净尺寸成型研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TB332

基金项目:


Near-Net Shape Forming of Thin Walled Profiled Resin Matrix Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过对成型工艺选择、模具结构设计及工艺参数的研究,探索了薄壁异形树脂基复合材料近净尺寸成型。研究结果表明,注料式模压克服了传统模压成型装料腔狭窄不易装料的问题,实现了薄壁异形树脂基复合材料的近净尺寸成型,极大地提高了材料利用率、降低了加工难度、缩短了成型周期。

    Abstract:

    Through forming process selection, mould structure design and process parameters optimization, the near net shape forming of the thin-walled profiled resin matrix composite is explored. The results show that the injection molding overcomes the problem that the charging chamber is narrow and difficult to load in the tradional molding process, and then, realize the near-net shape forming of thin-walled profiled resin matrix composites, which greatly improve the material utilization, reduce the difficulty of processing and shorten the molding cycle.

    参考文献
    相似文献
    引证文献
引用本文

肖娟,杨晓军,胡欣,蔡义各,马伟.薄壁异形树脂基复合材料近净尺寸成型研究[J].宇航材料工艺,2018,48(5):88-90.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2017-09-14
  • 最后修改日期:2017-12-31
  • 录用日期:
  • 在线发布日期: 2018-10-19
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭