非易燃易爆溶剂在喷涂烧蚀隔热涂层中的应用
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ639.2

基金项目:

中国航天科技集团公司共性工艺研究项目(GXGY-2015-001);中国运载火箭技术研究院工艺改进与研究项目(GYGJ15-211-39)


Application of Non-Inflammable and Non-Explosive Solvent on Painting Ablation-resistant Heat-Insulating Coating
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为消除易燃易爆的风险,使用非易燃易爆溶剂SK-410B代替汽油作为烧蚀隔热涂料的稀释剂。测试了涂层的剪切强度、低温性能、耐湿热性能。电弧风洞试验结果表明:涂层抗冲刷性能良好;试片的最高背面温度为55℃,可满足使用要求。

    Abstract:

    In order to eliminate the risk of inflammable and explosive, spraying ablation-resistant heat-insulating paint was realized by using non-inflammable and non-explosive solvent SK-410B as the diluents instead of gasoline. The shear strength,low temperature performance and hygrothermal property were tested. Arc heated wind tunnel test has shown that the coating has excellent thermal protection performance. The maximum temperature of the backside is 55℃. This method can satisfy the use requirement.

    参考文献
    相似文献
    引证文献
引用本文

肖世明,余剑,王绍成,高云翔,侯旭东.非易燃易爆溶剂在喷涂烧蚀隔热涂层中的应用[J].宇航材料工艺,2018,48(4):92-94.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2018-01-24
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-08-18
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭