复合材料舱体零件数控定位技术
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TP23

基金项目:


Technology of NC Positioning for Parts in Composite Case
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    复合材料壳体采用手工划线定位零件的装配方式,精度低、重复性差,对工人的操作水平要求较高,而且利用金属划针会造成复合材料壳体表面损伤,为改变手工划线定位现状,提出利用数控设备结合喷涂设备完成零件位置线标记,为保证零件位置轮廓准确性,开展等距喷涂技术研究,构建数控定位轨迹方程,通过数控系统硬件连接组建零件定位系统,通过数控设备结合喷码装置实现复合材料壳体表面零件轮廓位置的喷涂标记,零件定位精度可以满足±0.1 mm的要求,实现了数控定位代替手工操作方式,提升了复合材料壳体零件定位精度和一致性。

    Abstract:

    The assembly mode of composite case is hand crossed positioning method. It's low precision, poor repeatability, high level requirements for the operators and using the metal marking needle can cause surface damage of the composite shell. In order to change the status of hand crossed positioning, the method of NC equipment combined with the spraying equipment for the parts positioning was proposed. For making sure the accuracy of parts contour and position, equidistant spraying was researched. NC positioning trajectory equating was built. Through connecting spraying equipment with CNC system to build up NC positioning system for parts. The contour and position of parts on composite case was marked. The positioning accuracy of parts can reach ±0.1mm, NC positioning replacing handicraft method was realized. The technology improves the positioning accuracy and consistency of parts in composite case.

    参考文献
    相似文献
    引证文献
引用本文

王在铎,赵振,郭鸿俊,李华,张鑫.复合材料舱体零件数控定位技术[J].宇航材料工艺,2018,48(3):38-41.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2018-03-22
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-06-04
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭