金属壳体支座角焊缝应力场数值模拟
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TG457.1

基金项目:


Simulation of Welding Residual Stress in Metal Shell Fillet Welds Fabricated by Super-Strength Steel
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对某固体发动机金属壳体支座焊接过程及热处理过程,利用通用ANSYS有限元分析软件对不同尺寸支座角焊缝应力场进行模拟计算。结果表明:支座焊后的应力主要集中在角焊缝热影响区处,应力水平较高,且随着支座尺寸的增加,残余应力显著增加;壳体经过退火和调质热处理后,角焊缝残余应力得到重新分布,整体残余应力较小。

    Abstract:

    In this paper, the welding residual stress of metal shell fillet welds which are fabricated by super strength steel is simulated during welding and heat treatment process. Finite element simulation is performed by ANSYS code. The results show that the residual stress is concentrated in heat affected zone of support fillet welds. The peak stress increases with the number of spport fillet welds increaseing. In order to improve the performance of these metal shells, heat treatments (annealing and tempering) are used. It is revealed that the welding residual stress in the fillet welds decreases and redistribs after heat treatments.

    参考文献
    相似文献
    引证文献
引用本文

秦占领,熊然,张黎旭.金属壳体支座角焊缝应力场数值模拟[J].宇航材料工艺,2018,48(3):23-26.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2017-08-14
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-06-04
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭