引用本文:
【打印本页】   【HTML】   【下载PDF全文】   【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 443次   下载 478 本文二维码信息
码上扫一扫!
分享到: 微信 更多
热压罐成型过程中框架式模具温度场模拟与分析
熊蓉1,安鲁陵1,花蕾蕾1,岳烜德1,匡海华2
1.南京航空航天大学机电学院,南京 210016;2.高性能电磁窗航空科技重点实验室,济南 250000
摘要:
为了研究复合材料构件成型模具温度场,本文以某型飞机壁板的热压罐固化工艺为例,通过模型简化,利用FLUENT等仿真软件建立模具温度场的数值模拟模型,并将模拟数据与实验数据进行对比。结果表明二者平均相对误差为7.4%。此外通过仿真模拟一组以支撑板厚度为变量的实例,两组以U、V两个方向的支撑板厚度为变量的对照组,通过判断模具型板表面温度方差大小,研究了支撑板厚度对模具温度场分布的影响规律。结果表明,模具温度场的均匀性随着支撑板厚度的增加而逐渐降低,其中U向支撑板厚度的变化对温度场均匀性的影响比V向大。
关键词:  复合材料  热压罐成型工艺  框架式模具  温度场  FLUENT
DOI:10.12044/j.issn.1007-2330.2020.01.002
分类号:V261.97
基金项目:航空科学基金项目(20161852018);研究生创新基地(实验室)开放基金(kfjj20180506)
Simulation and Analysis on Temperature Field of Frame Mold in Autoclave Process
XIONG Rong1,AN Luling1,HUA Leilei1,YUE Xuande1,KUANG Haihua2
1.Nanjing University of Aeronautics and Astronautics,Nanjing 210016;2.Key Lab. of High Performance Electromagnetic Window for Aviation Science and Technology,Jinan 250000
Abstract:
In order to study the temperature field of the mold for forming composite material components,this article takes the autoclave curing process of a certain type of aircraft wall as an example.Through model simplification,a numerical simulation model of the mold temperature field is established by using simulation software such as FLUENT,and the simulation data and experiments are used for comparison.The results show that the average relative error is 7.4%.In addition,a set of examples with the thickness of the support plate as a variable and two control groups with the thickness of the support plate in the U and V directions were simulated.By judgment the surface temperature variance of the mold plate,the effect law of the thickness of the support on the influence of mold temperature field distribution plate was studied.The results show that the uniformity of the mold temperature field gradually decreases with the increasing of the thickness of the support plate,and the change of the thickness of the support plate in U direction has a greater effect on the uniformity of the temperature field than that in the V direction.
Key words:  Composite  Autoclave forming  Frame Mold  Temperature field  FLUENT