1420 铝锂合金锻件开裂原因分析与控制

首页 > 过刊浏览>2014年第44卷第2期 >67-70

1420 铝锂合金锻件开裂原因分析与控制
DOI:
                        
                    
作者:
                        
                        
                    
作者单位:中国运载火箭技术研究院
作者简介:
通讯作者:
中图分类号:
基金项目:

Analysis and Control for Crack Trouble of1420 Aluminum-Lithium Alloy Forging

Author:

Affiliation:

Fund Project:

摘要

图/表

访问统计

参考文献

相似文献

引证文献

资源附件

文章评论

摘要:

某产品用1420 铝锂合金锻件在存放过程中发生开裂。本文通过对失效锻件进行形貌观察以及

断口、金相和力学性能分析,结合此锻件的制造工艺,分析认为:此锻件的开裂属于延迟开裂;锻件小端转角区

(R 区)存在较大的应力,淬火水冷阶段在R 区内表面形成微小表层裂纹;长期的存放过程中,锻件表面受到腐

蚀,发生应力腐蚀;微裂纹在残余应力及应力腐蚀的作用下缓慢扩展直至发生失稳扩展形成宏观贯穿裂纹,致

使锻件开裂。通过车光锻件内外表面及车光后的荧光检查,有效地预防了此类开裂故障的发生。

Abstract:

A 1420 aluminum-lithium alloy forging used in a key project cracked when it was deposited in quarry.

In this paper, fraction analysis, metallographic analysis and mechanical property analysis were employed to investigate

the reason why cracking phenomenon happened. The results indicated that the cracking problem was delayed

cracking. Local stress concentration appeared in the R area, where micro-surface cracking formed at the phase of water-

cooling. In the process of the long-time storage, the surface of the forging was corroded, resulting in stress occurred.

Under the gradual action of residual stress and stress corrosion, micro-crack enlarged to be perforated crack,

which resulted in the cracking of the forging. Fortunately, such defect could be prevented by cutting the forging’s internal/

external surface away and then detected with fluoroscopy.

参考文献

相似文献

引证文献

引用本文

李东东韩露林德健刘涛谷胜民.1420 铝锂合金锻件开裂原因分析与控制[J].宇航材料工艺,2014,44(2):67-70.

复制

文章指标

点击次数:
下载次数:
HTML阅读次数:
引用次数:

历史

收稿日期:
最后修改日期:
录用日期:
在线发布日期: 2016-11-28
出版日期:

投稿方式

引用本文

分享

文章指标

历史