Si3 N4 粉体的分散及表面改性
DOI:
作者:
作者单位:

中国航天科技集团公司

作者简介:

通讯作者:

中图分类号:

基金项目:


Dispersion and Surface-Modified of Si3 N4 Powders
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    研究了以聚丙烯酸铵为分散剂的Si3N4 悬浮体的分散特性,以及酸洗和热氧化两种表面改性方法
    对Si3N4 悬浮体的分散性和流变特性的影响。结果表明:分散剂聚丙烯酸铵的最佳酸碱环境为pH=9,最佳使用
    含量为0.2wt%,酸洗可有效去除粉料中的金属杂质,使Si3N4 粉体在悬浮体中粒径分布更集中且粒径主峰值向小
    粒径移动,同时可使悬浮体的黏度降低。热氧化处理可大幅度降低Si3N4 悬浮体的黏度,提高其流变特性。

    Abstract:

    The dispersion property of Si3N4 was studied when ammonium polyacrylate was used as dispersant. And
    the influences of acid leaching and thermal oxidation on aqueous dispersibility were investigated. The results indicated
    that the best dispersing effect could be obtained when the ratio of ammonium polyacrylate was 0.2 wt% and pH=9. After
    acid leaching, both the width and the value of particle diameter became smaller. The contamination of metal can be
    eliminated efficiently by acid leaching. After themal oxidation, the viscosity of Si3N4 suspension dropped significantly.

    参考文献
    相似文献
    引证文献
引用本文

陈桂才. Si3 N4 粉体的分散及表面改性[J].宇航材料工艺,2013,43(4).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭