碳纤维/ 环氧复合材料壳体补强新工艺及方法对比研究
DOI:
作者:
作者单位:

西安航天复合材料研究所

作者简介:

通讯作者:

中图分类号:

基金项目:


Comparison With New Reinforcement Technology ofCarbon/ Epoxy Composite Case
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了降低复合材料壳体封头区域的应力集中,提高壳体整体性能,对复合材料壳体薄弱区进行补
    强以及采用何种方法进行补强是关键问题。本文以碳纤维椎150 mm 复合材料壳体为研究对象,以理论分析和
    有限元分析为依据,分别采用碳布补强和纤维缠绕补强对壳体前后封头及赤道附近位置进行补强。试验结果
    表明:纤维缠绕补强效果明显好于碳布补强,壳体特性系数由40. 3 km 提高到48. 5 km,应力平衡系数提高到
    0. 95,纤维发挥强度由3 378. 1 MPa 提高到4 058. 4 MPa。

    Abstract:

    To decrease the stress concentration on the dome of composite case, and improve the ability of the
    composite case, the key problem is how to reinforce the weakness of case and using which method to reinforce it. The
    椎150 mm case of carbon fiber composites is studied in this paper, on the basis of theoretical analysis and finite ele鄄
    ment analysis, using carbon cloth and filament winding to reinforce dome and around equator of the case. As a result,
    the effect of filament winding reinforcement is better than carbon cloth reinforcement,case characteristic factor reaches
    to 48. 5km, stress equilibrium up to 0. 95, developed fiber strength by 3 378. 1 MPa to 4 058. 4 MPa.

    参考文献
    相似文献
    引证文献
引用本文

王欢.碳纤维/ 环氧复合材料壳体补强新工艺及方法对比研究[J].宇航材料工艺,2013,43(2).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭