红外光谱研究丁基橡胶老化机理及寿命预测
DOI:
作者:
作者单位:

四川大学高分子科学与工程学院

作者简介:

通讯作者:

中图分类号:

基金项目:


Aging Mechanism and Lifetime Prediction of Butyl RubberUsing FTIR Techniques
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    对丁基橡胶进行室内加速热氧老化实验,同时采用FTIR 实时追踪丁基橡胶在老化过程中化学
    结构的演变,并进行二维相关分析。结果显示老化过程中C—H 和C—C 氧化形成自由基的速率较慢,为确定
    热氧老化反应速率的关键步骤,随后进行的热氧老化反应速率很快,最终氧化降解形成醛,酮,酯等老化产物。
    在充分理解丁基橡胶热氧老化机理的基础上,建立了丁基橡胶热氧老化的基元方程,按照老化过程中各基元反
    应的质量作用定律,建立了材料老化的氧化动力学模型。采用Matlab 编程,计算得到丁基橡胶在常温和高温
    之间的老化速率比。通过红外光谱追踪老化过程中基团变化的实验数据拟合建模计算得到的曲线,发现两者
    的变化趋势相同,表明采用该方法预测材料老化寿命具有极好的应用前景。

    Abstract:

    Thermal-oxidative aging experiments on butyl rubber were conducted, and structural evolutions of the
    rubber during aging were traced by real time infrared technique,and the resulting data were analysized by a 2D correlation
    spectroscopy analysis. The results suggest that free radicals derived from saturated C-H and C-C bonds which
    are attacked by oxygen atoms form slowly at the early stage of thermal aging. And it is a key step to determine the reaction
    speed. After that, the carbonyl species are generated rapidly, which results in formation of aldehydes, ketones
    and esters etc. and finally by degradation and oxidative. Based on a full understanding on the thermal-oxidative aging
    mechanism of butyl rubber, we constructed elementary reaction equations and furthermore, oxidation kinetic models
    according to mass action law of each elementary equation. The aging rate ratio of room temperature to high temperature
    is obtained by calculation of Matlab program. By fitting the curves described from the oxidation kinetic models with
    the data from FTIR tracing experimental for the aging process, it is found that both changes have the same tendency,
    which promises an excellent prospect for predicting lifetime of materials.

    参考文献
    相似文献
    引证文献
引用本文

郑 静.红外光谱研究丁基橡胶老化机理及寿命预测[J].宇航材料工艺,2013,43(1).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭