纤维增强基于α-BPDA 聚酰亚胺复合材料性能
DOI:
作者:
作者单位:

航天材料及工艺研究所

作者简介:

通讯作者:

中图分类号:

基金项目:


Properties of Fiber Reinforced Polyimide Composite Based on α-BPDA
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了考察基于α-BPDA 聚酰亚胺复合材料的高温性能,制备了纤维增强复合材料,进行了高温
    力学和热物理性能的测试。研究结果表明纤维增强复合材料的T5
    d 分解温度为565℃;Tg 超过471℃;在450℃
    下的弯曲强度保持率大于42%,弯曲模量保持率大于55%,短梁剪切强度保持率超过44%;400℃空气热老化
    50 h 后碳纤维复合材料的弯曲强度保持率66%,弯曲模量保持率为95%;300、500℃的石英增强复合材料的热
    导率分别为0. 503 和0. 657 W/ (m·K)。

    Abstract:

    To understand the properties of the fiber reinforced polyimide composite based on 2, 3, 3′, 4′-biphenyl-
    tetracarboxcylic anhydride ( a-BPDA) at high temperature,composite samples were preparel using carbon fiber
    and quartz fiber as reinforcement. The T5
    d decomposition temperature and Tg of composites were 565℃ and 471℃.
    The experimental results show that the retention of flexural strength,moduli and interlaminate strength of composites
    are 42%,55%,44% at 450℃,respectively;after treated 50 hours at 400℃ in air the retention of flexural strength and
    moduli of carbon fiber reinforced composites are 66% and 95%;and the coefficient transmit heat of quartz fiber reinforced
    composites at 300℃,500℃ are 0. 503 and 0. 657W/ (m·K)

    参考文献
    相似文献
    引证文献
引用本文

赵伟栋.纤维增强基于α-BPDA 聚酰亚胺复合材料性能[J].宇航材料工艺,2012,42(4).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭