引用本文:
【打印本页】   【HTML】   【下载PDF全文】   【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1155次   下载 1032  
分享到: 微信 更多
Φ10 mm 碳纤维复合材料管成型工艺及性能研究
赵锐霞
航天材料及工艺研究所
摘要:
对外径为Φ10 mm 碳纤维复合材料管成型工艺及性能进行了研究。结果表明,采用热缩工艺成
型的碳纤维复合材料管工艺简单、质量可靠,Φ10 mm 碳纤维复合材料管件弯曲刚度与不锈钢管相当,弯曲强
度为不锈钢的3 倍以上,质量仅为不锈钢的50%,尺寸精度满足设计要求。
关键词:  碳纤维复合材料管,成型工艺,性能
DOI:
分类号:
基金项目:
Forming Process and Properties of Φ10 mm Carbon FiberReinforced Composite Pipe
Abstract:
The forming process and properties of carbon fiber reinforced composite pipe with the diameter of
10mm were investigated. The results show that the carbon fiber reinforced composite pipe fabricated by the thermal
shrinkage process has the advantages of simple forming process and better quality reliability. Compared to the stainless
steel pipe with the diamemer of 10 mm, the carbon fiber reinforced composite pipe with the same diameter has the equivalent
flexural stiffness. While the flexural strength of composite pipe is more than three times of the stainless steel
with the same diameter, and its weight is only half of the stainless steel pipe. In addition, the composite has good dimension
precision which can meet the design requirements.
Key words:  Carbon fiber reinforced composite pipe,Forming process,Property