引用本文:
【打印本页】   【HTML】   【下载PDF全文】   【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1063次   下载 689  
分享到: 微信 更多
X-Cor 夹层结构压缩强度有限元分析
党旭丹
河南工程学院机械工程系
摘要:
利用有限元软件获得了X-Cor 夹层结构的应力场,并对其压缩强度进行分析。提出了适合于XCor
夹层结构失效机理分析的失效判据和材料刚度退化规则,明确其失效过程和模式。根据失效判据,采用有
限元模型中发生刚度退化的单元及其分布模拟失效的类型及扩展路径,说明X-Cor 夹层结构在压缩载荷下的
失效机理。有限元研究表明:压缩过程中,树脂区首先失效,其次是Z-pin,主要的失效模式是Z-pin 屈曲失效,
失效单元的扩展路径有一定的分散性。通过有限元分析结果与试验值的比较,数值吻合较好,计算误差为-
7. 6% ~9. 5%。
关键词:  X-Cor 夹层结构,压缩强度,Z-pin,有限元,失效判据,退化规则
DOI:
分类号:
基金项目:
Finite Element Analysis of X-Cor Sandwich’ s Compressive Strength
Abstract:
The finite element software was used to get the X-Cor sandwich’ s stress fields and its compressive
strength was also analysed. During the compressive strength analysis, the failure criterion and materials stiffness degradation
rules fitting for the analysis of the X-Cor sandwich’s failure mechanism were proposed and the X-Cor sandwich’s
failure process and modes were also clarified. According to the failure criterion we used the elements with stiffness
degradation and their distributions in the finite element model to simulate the types and propagation path of the
failure and the failure mechanisms of the X-Cor sandwich under compression were explained. The finite element analysis
indicates that during the compression firstly the resin regions fail and secondly the Z-pins fail. The main failure
mode is the Z-pin’s elastic buckling failure and the propagation paths of the failure elements are dispersive. By contrasting
the finite element results and experiments the values are consistent well and the error range is -7. 6% to
9. 5%
Key words:  X-Cor sandwich,Compressive strength,Z-pin,Finite element,Failure criterion,Degradation rule