时效处理对高强耐热镁合金等温模锻件组织与性能的影响
DOI:
作者:
作者单位:

航天材料及工艺研究所

作者简介:

通讯作者:

中图分类号:

基金项目:


Effect of Aging Treatment on Microstructure and Mechanical Properties ofForging Heat鄄Resisting Mg alloy
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用锻后直接时效处理的方法研究了时效处理工艺对高强耐热镁合金等温模锻件的组织与性
    能的影响,分析了其时效强化过程中第二相的形成及时效处理制度相关的断裂行为,得出了其时效强化的内在
    机理及优化的锻后时效制度。研究表明优化的时效处理制度为200益伊63 h。在该时效制度下,材料的室温抗
    拉强度达到了371 MPa,屈服强度达到243 MPa,伸长率达4. 1%

    Abstract:

    The effect of aging treatment on microstructure and mechanical properties of forging heat鄄resisting Mg
    alloy was studied by single aging treatment. The aging phase and fracture behavior were analized. Accroding to the ex鄄
    periment results the optimized treatment process and intrinsic mechanism were achived. After heat treatment at 200益伊
    63 h,the fracture strength reaches 371 MPa, the yield strength reaches 243 MPa and the elongation reaches 4.1%.

    参考文献
    相似文献
    引证文献
引用本文

张浩.时效处理对高强耐热镁合金等温模锻件组织与性能的影响[J].宇航材料工艺,2012,42(1).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭