弹性件剪切模量随压力变化的试验分析
DOI:
作者:
作者单位:

西北工业大学航天学院

作者简介:

通讯作者:

中图分类号:

基金项目:


Dependent of Shear Modulus of Elastomer on Different Pressure
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过单轴拉伸与平面拉伸试验,得到了柔性接头弹性件橡胶材料“三阶五项式冶超弹本构模型参
    数,通过有限元计算证明了该模型的优越性。为了获得柔性接头弹性件材料剪切模量随容压的变化规律,设计
    了双轴加载试验装置和表征柔性接头弹性件的三重片试件,进行了压缩剪切联合加载试验及有限元数值模拟。
    试验结果发现,橡胶材料的剪切模量并没有随压力的升高而减小,该现象与计算结果吻合较好。

    Abstract:

    Planar and uniaxial tests were implemented to achieve 3nd order 5th item strain model constant of the
    elastomer and it is proved this model was superior to others. In order to measure the shear modulus of the elastomer at different pressure,that biaxial device and three board sample,were designed and the shear compression test was conducted this process was simulated. The test results show that the shear modulus of the elastomer will not decrease with enhancing compression which agreed with well with the simulation.

    参考文献
    相似文献
    引证文献
引用本文

王春光 田维平 史宏斌 李江 陈聪.弹性件剪切模量随压力变化的试验分析[J].宇航材料工艺,2011,41(5).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭