复合材料质量烧蚀率计算模型实验研究
DOI:
作者:
作者单位:

中国兵器工业集团第五三研究所

作者简介:

通讯作者:

中图分类号:

基金项目:


Experimental Validation of Calculated Model on Mass Loss Rate of Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过对CF/ S-157PF 复合材料进行氧-乙炔烧蚀试验研究,得到了质量烧蚀率,并利用多元线性
    回归方法,拟合得到了该参数与热流密度和烧蚀时间的数学模型,即M = 0郾043·q0. 128·t-0. 191 。经检验,该回归
    模型适用性较好,预测精度较高,为复合材料该项烧蚀性能的评估建立了快速、有效、可靠的试验方法。

    Abstract:

    In this paper, the important characteristic parameter, namely the mass loss rate, was obtained by the
    investigating on CF/ S-157PF composite under oxyacetylene flame test conditions. And using multiple linear regression, the mathematic model on the mass loss rate and the two major factors, namely the heat flux density and ablation time is as follows: M = 0. 043·q0. 128·t-0. 191 . It is verified that, the regression model is very applicable and the fore cast accuracy is much better. So the erosion properties of CF/ S-157PF composite can be evaluated with this rapid, effective and accurate method in the oxyacetylene flame test.

    参考文献
    相似文献
    引证文献
引用本文

周燕萍 魏莉萍 郑会保 孟祥艳 刘运传.复合材料质量烧蚀率计算模型实验研究[J].宇航材料工艺,2011,41(5).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-28
  • 出版日期:
第十一届航天复合材料成形与加工工艺技术中心交流会 征文通知

关闭